top of page
3d print at home.png
Logitech Pedal Extensions

Free

DIY Project (Digital Download)

Pedal extensions and textured faces for any Logitech GX pedal set (G27, G29, G920 and G923).

Features

  • Textured pedal faces

  • Robust design (works with load cell)

  • Vertical pedal position

  • Less ankle strain


Contents of Purchase

  • 3D printable files


How to Install

  1. Obtain to following:

    • 4x M4 12mm countersunk bolts

    • 4x M4 40mm countersunk bolts

    • 8x M4 nuts

  2. Print all parts. It is recommended to print the pedal faces on their side for optimal quality.

  3. Remove the original pedal faces.

  4. Install the arms to the original pedals using M4 12mm countersunk bolts and M4 nuts.

  5. Install the faces to the arms using M4 40mm countersunk bolts and M4 nuts.

​​

What am I buying?

​

You are purchasing an entirely digital download, with all project files required for the build delivered after purchase. 

​

What parts are required?

​

All materials and costs for this build can be found in the Rival Materials List. This allows you to find and price up all parts required for any Rival product without purchasing anything. This also contains an 'Estimate Build Cost' for each product, letting you know exactly how much your build will cost including materials.

Quality Disclaimer

Every Rival product depends on the quality of your 3D prints, the accuracy of your assembly, and using the correct components. If a product fails because of poor print quality, printer issues, incorrect assembly, or the wrong parts being used, I can’t be held responsible for the results.


Design Notes

"I've always found the pedal design for the Logitech GX series to be robust and full of potention, but were designed too short and flat, presumably due to the target audience using these at desks. These extensions puts them to where they should be when using a rig. Coupled with a load cell modification, makes for a great rival to any pedal set."

bottom of page